Low profile design- only 15/16". Bright dimmable white light that lasts three times longer than halogen 120V xenon lamps require no transformer. Front lens cover prevents light leakage. Prismatic tempered glass lens reflects light evenly. Full length specular reflector optimizes light output. Magnetic lens closure reliably secures cover without clips or tabs that can bend or break. Easy installation - lamps included with each fixture. Tool-free access to wiring compartment. New captive scres speeds mounting and installation. Choose from plug-in with included power cord or hardwire featuring stab connectors and multiple knockouts. High/low/off switch. Can I hardwire the PRIORI Xenon plug-in fixture? Answer: Yes, the plug-in fixture (also known as a convertible fixture) allows three different ways to power the fixture: 1) use the power cord included for a portable installation, 2) use one of the knockouts to bring 120V wire to the wiring compartment (this should be performed by qualified electricians only), and 3) purchase a hardwire box (043J, sold separately) and have a qualified electrician install this. With any of these power input methods, multiple fixtures can be linked to the first using linking extensions or by connecting directly end-to-end. How many knockouts does each fixture have? Answer: The 10" size has one, the 14" size has three, the 22" and 32" both have five. Does the PRIORI Xenon use standard ½" knockouts? Answer: No, the knockouts are 3/8" size. A cable connector is included with each fixture to speed installation. Where do I locate the fixture relative to the cabinet during installation? Answer: For optimal illumination, the fixture should be mounted as close to the front of the cabinet as possible to get the maximum amount of light over the work area. Leave 1" of clearance at the front edge for future access to the lens cover for lamp replacement. How many PRIORI Xenon Under Cabinet fixtures can I wire together? Answer: A maximum of 600 watts can be linked together using linkable extensions (sold separately) or by connecting fixtures end-to-end with the power connections on each end, forming a seamless bank of lights. (This is a good method for frameless cabinetry.) What is the lamp size for the PRIORI Xenon Under Cabinet Light? Answer: The maximum overall length (M.O.L.) is 1-3/4" and the diameter is 9/32", similar to a JCD type lamp. The standard lamp (included with each fixture) is a 20-watt, 120-volt Xenon bi-pin bulb with a G8 base. Where can I get replacement bulbs? Answer: American Lighting or one of our distributors. Can PRIORI Xenon fixtures be installed in a wet location or an outdoor area thats covered? Answer: No, these fixtures are designed for indoor locations only.